UFH System Components

Mainfoil Clips

Mainfoil Clips

Used in conjunction with Mainfoil, the Mainfoil Clips are designed to straddle a standard 50mm joist at 400mm centres.

Mainfoil Insulation

Mainfoil Insulation

Designed for use with intermediate timber floor constructions, Mainfoil has high insulating and reflective properties. The foil increases the thermal efficiency of the system and allows installation to be carried out between joists. (One 30m2 roll = 20m2 UFH coverage).

Heat Emission Plate

Heat Emission Plate

Maincor Heat Emission Plates are for use in timber suspended floors where the joists are at 400mm centres, or in floating floor applications. The plates are 390mm wide x 1m in length. Allow 2.2 plates per m2 of floor area. Scored plates available at 150mm centres. Varying pipe sizes and centres available on request.

Floating Floor Panel

Floating Floor Panel

Maincor Floating Floor Panels are for use with the heat emission plates. The boards are made from pre-routed expanded polystyrene. When used in ground floors, additional insulation may be required to comply with Part L of the Building Regulations. Panels are available in different thicknesses and centres.

Floating Floor - Low Profile 15mm

Floating Floor - Low Profile 15mm

Polystyrene foam with Aluminium foil, 45microns thick, is factory bonded to the upper surface of the panel (and into the main grooves). The boards are 15mm thick and are pre-routed to accept 12mm pipe laid at 150mm centres. (Special order only, please call for availability)

Pipe Staples

Pipe Staples

Maincor Pipe Staples are used to fix pipework to EPS or equivalent insulation, which must be a minimum depth of 25mm. They can be installed by hand or by staple gun. (See tools section).

Clamp Track

Clamp Track

Maincor Clamp Track is designed to secure 16mm pipe. It has a self adhesive backing for ease of installation. Allow 1m for every m² of floor area.

Screed Foil

Screed Foil

Maincor Screed Foil is designed to be placed directly on top of the floor grade insulation, providing a greater level of reflective insulation. Supplied in 60m x 1.25m rolls. Thermal resistance = 0.081m2K/W.

Pipe Positioning Panel

Pipe Positioning Panel

Maincor Pipe Positioning Panels are used for securing 16mm pipe within screeded floors. The castellated panels allow for the pipe to be secured at 50mm centres. Insulation is not included. The boards are to be overlapped. Each board covers an active area of (0.8m x 1.4m) 1.12m²

Edge Insulation

Edge Insulation

Maincor Edge Insulation is utilised around the perimeter of a room with a screeded floor to absorb expansion from the screed and prevent thermal bridging. The edge insulation also comes complete with a polyethylene section which is used to give a tight seal between edge insulation and floor insulation.