Manifolds & accessories

UFH Manifold with Flowmeters

UFH Manifold with Flowmeters

Maincor 1 – 12 port UFH Manifolds are supplied complete with flowmeters for ease of commissioning. Also included within the manifold arrangement are fill and drain ports, automatic air vents and fixing brackets. Requires pipe connectors and ball valves, both are sold separately.

UFH Control Pack

UFH Control Pack

Maincor UFH Control Packs are pre-assembled units which bolt directly onto the manifold and are used to blend and circulate the water around the underfloor heating system. The Control Pack includes an ‘A’ rated energy efficient pump and is suitable for serving areas of up to 150m2 or a maximum heat load of 14kW.

Large Control Pack

Large Control Pack

The Maincor Large Control Packs include a blending valve, an ‘A’ rated energy efficient pump and an temperature controller complete with temperature sensor. The pack is suitable for use  with floor areas of upto 250m2 or a maximum output of 20kW.  Available in left and right hand configurations.

Weather Compensated Control Pack

Weather Compensated Control Pack

The Maincor Weather Compensated Control Pack modulates the flow temperature to the system requirements depending on outdoor weather conditions. The unit includes a blending valve, an ‘A’ rated energy efficient pump a temperature controller complete with temperature sensor and an outdoor sensor. The pack is suitable for use with floor areas of upto 250m2 or a maximum output of 20kW. Available in left and right hand configurations.

Heat Pump Pack

Heat Pump Pack

The Maincor Heat Pump pack is for use when water blending controls are not required. The unit is pre-assembled and is designed to be fitted on to either side of the manifold. A high limit shut off is included and pre-set to 60oC.

Thermostatic Manual Mixing Valve

Thermostatic Manual Mixing Valve

Maincor Thermostatic Mixing Manual Valve for blending water to meet design temperature.

Straight Ball Valve

Straight Ball Valve

Maincor Straight Ball Valves are used to provide isolation for the flow and return pipework connecting onto the Plumbing, Radiator or Underfloor Heating Manifolds. This allows the manifold to be isolated both for filling the system, or draining down, without the risk of air ingression.

Manifold Pipe Connector

Manifold Pipe Connector

Maincor Manifold Pipe Connectors join 12mm, 16mm & 20mm pipework to the manifold. For use with the Plumbing, Radiator or Underfloor Heating Manifolds.

Blanking Plug

Blanking Plug

Maincor Blanking Plugs are used to blank-off outlets on the Plumbing, Radiator or Underfloor Heating Manifolds.

2 Port Zone Valve Actuator

2 Port Zone Valve Actuator

Maincor 2 Port Zone Valve and Actuator offers independent zone control. This normally closed valve can also activate the heat source via the volt free contacts.

Electro-Thermic Head

Electro-Thermic Head

Maincor offers 230V and 24V Electro-Thermic Heads which open and close to control the flow of water around the underfloor circuits.